Open the SIP Server Settings dialog to configure the camera's integrated SIP server. The camera's SIP server can play the role of a SIP provider in a local network if you would like to establish video connections between cameras, SIP phones and softphones (i.e. computer applications with SIP functionality). Note that every device will need its own SIP account.
For additional information on the SIP telephony topic, see the VoIP Settings help page.
This section contains the basic settings of the SIP server. Note that you cannot change the server's IP address and port. You will need this information when configuring the attached SIP phones, for example.
|
Parameter |
Description |
|---|---|
|
SIP Server |
Use this option to either Enable or Disable the SIP server. |
|
Realm |
Sets the realm of the SIP server. One realm combines a group of SIP accounts and only members of the same realm can talk to one another. |
|
Missed Calls |
Select if you would like to be notified about missed calls. If multiple calls are dialed out simultaneously, this option should be unchecked. Otherwise you will be notified of missed calls even if the call was pick up at another receiver. |
This section manages the SIP accounts. Click on Add new profile at the bottom of the dialog to create a new SIP account. Every account consists of a SIP address, a user name and a password.
|
Parameter |
Description |
|---|---|
|
SIP Address |
The SIP address works like a phone number. If you are using SIP phones, make sure that you can enter the SIP address using the phone keys. |
|
User Name |
Enter the user name you would like to set for this SIP address. |
|
Password |
Enter the password you would like to set for this SIP address. |
|
Delete |
To delete one or more accounts, activate the corresponding checkboxes and click on the Set button. |
設定 ボタンをクリックすると､次にカメラが再起動するまでの間、設定内容が保存され有効になります。
出荷時設定 ボタンをクリックして、このダイアログに工場出荷時設定値をロードします (このボタンはすべてのダイアログにはありません)。
リストア ボタンをクリックすると、カメラに永久保存される前の直近の変更が元に戻ります。
閉じる ボタンをクリックするとダイアログが終了します｡ダイアログを終了している間、システムは設定全体に変更があるかどうか確認をします｡設定に変更が検出されると、システム設定値を永久に保存するかどうか確認されます｡